Manual Edelin1

Package Includes

  • Wireless headphones Edelin1
  • Silicone S, M, L eartips, Cord management clip
  • Micro USB charging cable
  • Carrying case
  • User’s manual
  • Gift box

Specifications

Model
Edelin1
Bluetooth version
4.1+EDR
Support profiles
HFP, HSP, AVRCP, A2DP
Built-in battery
100 mAh
Working distance
30 feet/10 m
Talk time
Up to 9 hours
Music time
Up to 8 hours
Standby time
Up to 240 hours
Charging time
1.5-2 hours
Water resistance
IPX-7
Echo noise reduction
CVC6.0

Features

    • Built-in microphone
    • Voice prompts
    • HD audio
    • Stereo sound
    • iOS battery capacity display
    • Multi-point function
    • Multi-function button (MFB)

Volume Button

Volume / (Press the button one time, the volume will change one level).

LED

Red light is on
While charging
Blue light is on
When fully charged
Blue and red light flashing
Pairing mode
Red light flashing twice and voice prompt
Low battery

Multi controls

Function
Operation
Power on/off
Long press MFB for 2 seconds
In pairing mode
Long press MFB for 4 seconds
Answer/End call
Short press MFB one time
Reject
Long press MFB for 2 seconds
Redial
Double press MFB one time
Cancel/End
Short press MFB one time
Pause/Play
Short press MFB one time
Volume+/Volume-
Short press +/-
Previous song/Next song
Long press -/+

How to Wear the Edelin1 Headphones

Using the correct size eartips is critical for external noise cancellation and securely staying in your ear.

      • Use the appropriate size expandable to help the headphones stay in place. Edelin1 headphones have a wire that could be easily fixed around the back of your head (neck) using a supplied cord management clip to ensure additional securing of the headphones and preventing their loss. It is also common to have different sized ear canals so try the eartips one at a time to find the best fit for each side. Everyone has individual anatomic features, and to find the most comfortable fit, you might have additionally to buy specialized tips.
      • To set the eartip firmly try gently pulling on the outer rim of your ear to ease the tip into a comfortable position. You should notice a drop in ambient noise when the tip is seated correctly. And when you’re listening to music, you’ll notice more range, especially bass.
Comfortable and secure fit

How to Charge

The battery has approximately 9 hours of battery life. When the sound becomes intermittent, you hear Low Battery, or if the LED indicator flashes two times every 20 seconds, it means the battery is running low. Once this happens, you have about 5-10 minutes of use before the headphones power off automatically.

Charge the battery by:
      • Using the provided USB to micro USB cable, connect the micro USB end of the charging cable to the micro USB charging port and the standard USB end to a PC USB port or USB charger.
      • The LED indicator will be red while charging. It will turn blue after 1.5-2 hours. The battery is now fully charged.

How to Connect Headphones to Your Device

To pair to your Bluetooth enabled device:

      • Activate the Bluetooth feature on your device and keep within 3 feet/1 meter while pairing.
      • Press and hold MFB for approximately 4 seconds until red and blue LED flash rapidly.
      • Using your Bluetooth enabled device, scan/search for available Bluetooth devices (check your device’s manual if you’re unsure how to do this).
      • Select Edelin1 from the device list.
      • If prompted, enter password or PIN No: 0000
      • If prompted by your device to connect, select Yes.
      • After pairing is successful, the LED indicator will flash blue twice. You can answer calls or listen to music.
      • The next time you switch on the headphones, they will automatically search for and attempt to connect to the last paired device.

How to Connect Headphones to Multiple Devices

If you want to use the Edelin1 to listen to another device:

      • Activate the Bluetooth feature on your device and keep within 3 feet/1 meter while paring.
      • Press and hold MFB for approximately 6 seconds until red and blue LED flash rapidly.
      • Using your Bluetooth enabled device, scan/search for available Bluetooth devices (check your device’s manual if you’re unsure how to do this).
      • Select Edelin1 from the device list.
      • If prompted, enter password or PIN No: 0000
      • If prompted by your device to connect, select Yes.
      • After pairing is successful, the LED indicator will flash blue twice. You can then answer the phone or listen to music.
      • To connect another device, temporary switch off Bluetooth on the first device you connected to.
      • Repeat steps 1-7 and connect the other device.
      • Turn Bluetooth back on for the first device.
For optimal sound quality, the distance between your device and the headphones must be less than 30 feet/10 meters, in an open space with no solid obstacles in the way.

How to Reconnect the Headphones

After the connection is lost,Edelin1 will try to reconnect automatically to any previously paired devices. If reconnection does not happen automatically, press the MFB once or reconnect through the Bluetooth menu on your device.

Restore Factory Setting

Press and hold the MFB for about 7 seconds while charging, until the LED flash blue 3 times (headphones should be disconnected from your devices).

Troubleshooting

Device can’t find headphones
      • Ensure the Edelin1 is in pairing mode, and LED flash blue and red. Refer to previous section on how to enter pairing mode.
      • If Edelin1 is in pairing mode and flashes blue and red, but is still not found by your device, please turn off Bluetooth on your device and wait for 2 seconds. Turn Bluetooth on and find Edelin1.
      • If Edelin1 is in pairing mode and flashes blue and red and step 2 doesn’t help, restart your device and the headset.
      • If no connection is made within two minutes after the headphones have been in the pairing mode, it will exit pairing mode automatically.
      • Restore Edelin1 to factory settings by following instructions from the previous section of the manual. If headphones will not switch off, they can be reset back to normal by charging them.
Frequent disconnection and noise
      • Ensure your headphones are fully charged.
      • Ensure the distance between your device and the headphones is less than 30 feet/10 meters.
      • Ensure nothing is blocking the signal between your device and your headphones.
      • Restore Edelin1 to factory settings by following instructions from the previous section of the manual. If you do not use headphones for longer than 3 minutes while not connected to a device, they will automatically power off to conserve power.
Device is connected to headphones, but music is not heard
      • Please go through troubleshooting steps 1 and 2 (Device can’t find headphones).
      • Keep in mind some devices do not have a stereo Bluetooth module and Bluetooth function to listen to music. Please connect your Bluetooth headphones to another device.
      • Restore Edelin1 to factory settings by following instructions from the previous section of the manual.
The red LED does not come on while charging
      • This can happen when you have not used headphones for a long time. Please allow at least 30 minutes to charge and the problem should be solved.
      • Restore Edelin1 to factory settings by following instructions from the previous section of the manual.
Can’t connect the headphones to your device
      • Reset the Edelin1 to factory settings by following instructions for a hard reset.
      • Go to your device’s Bluetooth menu and delete all saved devices from the list by clicking “Forget this device”.
      • Turn your device’s Bluetooth off then turn it back on; Edelin1 will be deleted.
      • Power off device then turn back on.
      • Unplug Edelin1 from charging cable then power on.
      • Enter the headphones into the pairing mode and follow instructions for connecting.
My device is asking for a password

If prompted, please enter 0000 as the password on your device.

Safety Rules

      • Never disassemble or modify your headphones for any reason. Doing this may cause headphones to malfunction or become combustible. The damage to your device can void your manufacturer’s warranty.
      • Avoid exposing your device to very cold or very hot temperatures (below 37F/3Co or above 112F/45Co). Extreme temperature can cause the deformation of the device and reduce the life of your device.
      • Avoid using your device’s light close to the eyes of children or animals.
      • Do not use the device during a thunderstorm. Thunderstorms can cause the device to malfunction and increase the risk of electric shock.
      • When using carrying case, make sure that the headphones lie properly and do not interfere with the closing of the carrying case. Forced closing the carrying case can damage your headphones.
NOTE: Do not charge your headphones for longer than 2-3 hours at a time, because this can lead to reduction in battery capacity and void your manufacturer's warranty. Use only the provided USB/micro USB cable. Excessive sweating may damage the product. Make sure to wipe the headphones dry before charging.

Battery Information

      • Your device is powered by a rechargeable battery. Unplug the charger from the electrical plug and the device when not in use.
      • If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity.
      • Please do not leave the device in hot or cold places, such as in a closed car in summer or winter conditions because this will reduce the capacity and lifetime of the battery.
      • Do not dispose of the batteries in a fire as they may explode. Batteries may also explode if damaged.

We really appreciate that you chose EDELIN as your trusted brand of Bluetooth headphones and sincerely hope you enjoy the great sound and comfort EDELIN provides. We love making our customers happy by providing true value with our products.
If for any reason you are not completely satisfied with your purchase, let us know immediately, and we will do everything to make sure you are happy.

Edelin1 Meets IPX7 Water Resistance

Suitable
Splashing
Rain or snow
Showering
Unsuitable
Swimming
Diving

WARRANTY

1 Year Parts and Labor Warranty

The following issues are excluded from EDELIN warranty cover:

    • Products purchased as 2nd hand or used
    • Products purchased from unauthorized retailer and distributor
    • Damage resulted from misuse and abusive action
    • Damage resulted from chemical, fire, radioactive substance, poison, liquid
    • Damage resulted from natural disaster